Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T11:18:39.928Z Has data issue: false hasContentIssue false

Metal Vapour Vacuum Arc Ion Source to Synthesize Refractory Metal Silicides

Published online by Cambridge University Press:  22 February 2011

B.X. Liu
Affiliation:
Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, CHINA
D.H. Zhu
Affiliation:
Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, CHINA
H.B. Lu
Affiliation:
Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, CHINA
K. Tao
Affiliation:
Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, CHINA
Get access

Abstract

Metal Vapour Vacuum Arc (MEWA) Ion Source was employed, for the first time, to synthesize metal suicides. Refractory metal suicides NbSi2, TaSi2, WSi2 and MoSi2 were successfully formed by implanting respective metal ions into Si(111) wafers. It was found that the high current density metal ion implantation not only provided the metal components but also caused a simultaneous annealing for various metal-suicide phases to grow. When the impLantation was conducted at 40 kV, the Nb ion current density was up to 76 µA/cm2 at a dose of 4x1017/cm 2, and the Ta, W and Mo ion current densities were up to 65 µA/cm2 at a dose of 5×1017 ions/cm2 , hexagonal NbSi2, TaSi2, MoSi2 and WSi2 were formed. Post annealing transformed the WSi2 and MoSi2 phases from hexagonal to tetragonal structure, featuring lower resistance than that of the as-implanted ones.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable