Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T18:04:55.935Z Has data issue: false hasContentIssue false

Metalorganic and Microwave Processing of Eutectic Al2O3-ZrO2 Ceramics

Published online by Cambridge University Press:  15 February 2011

M. Willert-Porada
Affiliation:
Universität Dortmund, Department Chemical Engineering, Div. of Material Sciences, D-44221 Dortmund, F.R. Germany
T. Gerdes
Affiliation:
Universität Dortmund, Department Chemical Engineering, Div. of Material Sciences, D-44221 Dortmund, F.R. Germany
Get access

Abstract

The spatial distribution and sintering activity of ZrO2 governs the microstructure evolution upon microwave sintering of alumina-zirconia ceramics. Using the same microwave sintering profile thermal runaway occurs, when ZrO2-powders with high specific surface area are employed, yielding ceramics with eutectic Al2O3-ZrO2 inclusions, whereas ZTA-type ceramics are obtained from low specific surface area powders. Microwave sintering yields ceramics with a higher density at a particular sintering temperature as compared to conventional sintering.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable