Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-12T19:57:35.983Z Has data issue: false hasContentIssue false
  • English
  • Français

Metal-Polymer Interphases in Structural Adhesive Joints

Published online by Cambridge University Press:  15 February 2011

G. D. Davis
G. D. Davis*
Affiliation:
Martin Marietta Laboratories, 1450 South Rolling Road, Baltimore, MD 21227
Get access

Abstract

High-performance structural adhesive joints, such as those found in aerospace components, must exhibit both high initial strength and excellent durability in severe environments. These properties are largely governed by the bonding across and the stability of the metal (oxide) - polymer interphase. Modern adherend surface treatments commonly provide the required adequate strength and durability. Factors that can degrade or limit joint strength and durability are discussed along with means to improve or, at least, to prevent reduction of these properties. Finally, areas in which advances are needed: increased understanding of bonding phenomena, improved reliability of bonded joints, and minimized environmental burdens are suggested.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 304: Symposium H – Polymer/Inorganic Interfaces , 1993, 3
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Clearfield, H.M., McNamara, D.K., and Davis, G.D., in Engineered Materials Handbook Vol.3: Adhesives and Sealants, chm, H.F. Brinson (ASM International, Metals Park, OH, 1990), p. 259.Google Scholar
2. Thrall, E.W. and Shannon, R.W., eds., Adhesive Bonding of Aluminum Alloys (Marcel Dekker, New York, 1985).Google Scholar
3. Wegman, R.F., Surface Preparation Techniques for Adhesive Bonding (Noyes, Park Ridge, NJ, 1989).Google Scholar
4. Comyn, J., in Durability of Structural Adhesives, ed., A.J., Kinloch (Applied Science, London, 1983), p. 85.Google Scholar
5. Davis, G.D. and Shaffer, D.K., in Handbook of Adhesives Technology, ed., A. Pizzi and K.L. Mittal (Marcel Dekker, New York, in press).Google Scholar
6. Davis, G.D., Surf. Interface Anal. 20, xxx (1993).CrossRefGoogle Scholar
7. Davis, G.D., Surf. Interface Anal. 17, 439 (1991).Google Scholar
8. Wagner, C.D., Passoja, D.E., Hillery, H.F., Kinisky, T.G., Six, H.A., Jenson, W.T., and Taylor, J.A., J. Vac. Sci. Technol. 21, 933 (1982).Google Scholar
9. McNamara, D.K., Matienzo, L.J., Venables, J.D., Hattayer, J., and Kodali, S.P., in Proc. 28th Nat. SAMPE Meeting, (SAMPE, Azusa, CA, 1983).Google Scholar
10. Chen, J.M., Sun, T.S., Venables, J.D., and Hopping, R.L., in Proc. 22nd Nat. SAMPE Meeting, (SAMPE, Azusa, CA, 1972), p. 25.Google Scholar
11. Venables, J.D., McNamara, D.K., Chen, J.M., Sun, T.S., and Hopping, R.L., Appl. Surf. Sci. 3, 88 (1979).Google Scholar
12. Kinloch, A.J., Adhesion and Adhesives: Science and Technology (Chapman and Hall, London, 1987).CrossRefGoogle Scholar
13. Ahearn, J.S., Davis, G.D., Sun, T.S., and Venables, J.D., in Adhesion Aspects of Polymeric Coatings, ed., K.L., Mittal (Plenum, New York, 1983), p. 281.Google Scholar
14. Davis, G.D., Ahearn, J.S., Matienzo, L.J., and Venables, J.D., J. Mater. Sci. 20, 975 (1985).CrossRefGoogle Scholar
15. Davis, G.D., Sun, T.S., Ahearn, J.S., and Venables, J.D., J. Mater. Sci. 17, 1807 (1982).Google Scholar
16. Brown, S.R., in Proc. 27th Nat. SAMPE Meeting, (SAMPE, Azusa, CA, 1982), p. 363.Google Scholar
17. Clearfield, H.M., Shaffer, D.K., VanDoren, S.L., and Ahearn, J.S., J. Adhes. 29, 81 (1989).Google Scholar
18. Kinloch, A.J., in Durability of Structural Adhesives, ed., A.J., Kinloch (Applied Science, London, 1983), p. 1.Google Scholar
19. Marceau, J.A. and Thrall, E.W., in Adhesive Bonding of Aluminum Alloys, eds., E.W., Thrall and R.W., Shannon (Marcell Dekker, New York, 1985), p. 177.Google Scholar
20. Marceau, J.A., Moji, Y., and McMillan, J.C., Adhes. Age 20, Oct. 1977.Google Scholar
21. Kuperman, M.H. and Horton, R.E., in Engineered Materials Handbook Vol.3: Adhesives and Sealants, chm, H.F., Brinson (ASM International, Metals Park, OH, 1990), p. 801.Google Scholar
22. Boerio, F.J., Davis, G.D., deVries, J.E., Miller, C.E., Mittal, K.L., Opila, R.L., and Yasuda, H.K., ”Polymer-Metal (Oxide) Interfaces,” in Current Status, Research Needs, and Opportunities in Applications of Surface Processing to Transportation and Utilities Technologies, Report NREL/CP-412–5007, eds., A.W., Czanderna and A.R., Landgrebe, (National Renewable Energy Laboratory, Golden, CO, 1992), p. 23–1.Google Scholar
23. Gause, R.L., “A Noncontacting Scanning Photoelectron Emission Technique for Bonding Surface Cleanliness Inspection,” NASA Technical Memorandum 100361, Marshal Space Flight Center, 1989 Google Scholar