Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T22:46:32.047Z Has data issue: false hasContentIssue false
  • English
  • Français

Methods for Porosity Characterization of Cement Based Materials

Published online by Cambridge University Press:  22 November 2012

M.M. Canut and
M. R. Geiker
M.M. Canut
Affiliation:
Department of Civil Engineering, Technical University of Denmark, Kgs. Lyngby, DK
M. R. Geiker
Affiliation:
Department of Civil Engineering, Technical University of Denmark, Kgs. Lyngby, DKDepartment of Structural Engineering, Norwegian University of Science and Technology, NO
Get access

Abstract

Important pore structure parameters related to mechanical properties and durability of cement-based materials can be determined by techniques such as scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), and low temperature calorimetry (LTC). The methods provide information on porosity characteristics as pore volume, pore thresholds and/or pore size distribution in different size ranges and do therefore to a large extent supplement each other. Pastes of w/b=0.4 with 0%, 40% or 70% slag by volume were cured saturated at 20ºC for up to two years. The porosity was characterized by LTC, MIP, and SEM. Higher volume of pores was obtained by MIP compared to results obtained using LTC and SEM. Measured porosity was correlated with predicted porosity using information on the density and degree of hydration of the cement and slag. Porosity estimation showed best agreement with the porosity data measured by MIP. The use of slag showed the same trend for all tests: a higher total volume of pores, but a lower threshold pore size when compared with Portland cement paste. The findings illustrate the importance of measuring not only pore volume but also threshold pore sizes when characterizing porosity of cement-based materials with different binder compositions.

Keywords

compositeporosityporosimetry

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

Skinner, L. M. and Sambles, J. R. S., “The Kelvin equation-a review,” Aerosol Science and Technology, vol. 3, no. November 1971, 1972.Google Scholar
Sun, Z. and Scherer, G. W., “Pore size and shape in mortar by thermoporometry,” Cement and Concrete Research, vol. 40, no. 5, pp. 740–751, May 2010.CrossRefGoogle Scholar
Kocaba, V., “Development and evaluation of methods to follow microstructural development of cementitious systems including slags,” 2009.Google Scholar
Washburn, E. W., “Note on a method of determining the distribution of pore sizes in a porous material,” Physics, vol. 7, pp. 115–116, 1921.Google Scholar
Canut, M. M. C., “Pore structure in cement based materials,” Technical University of Denmark, 2011.Google Scholar
Lindgreen, H., Geiker, M., Krøyer, H., Springer, N., and Skibsted, J., “Microstructure engineering of Portland cement pastes and mortars through addition of ultrafine layer silicates,” Cement and Concrete Composites, vol. 30, pp. 686–699, 2008.CrossRefGoogle Scholar
Hooton, R. D., “Permeability and pore structure of cement pastes containing slag, fly ash and silica fume,” ASTM Special Technical Publication, pp. 128–143, 1986.Google Scholar