Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T10:22:40.570Z Has data issue: false hasContentIssue false

Micro- and Nano-Fabrication of Polymer Based Microfluidic Platforms for BioMEMS Applications

Published online by Cambridge University Press:  01 February 2011

Siyi Lai
Affiliation:
Department of Chemical Engineering, The Ohio State University Columbus, OH 43210, USA
L. James Lee
Affiliation:
Department of Chemical Engineering, The Ohio State University Columbus, OH 43210, USA
Liyong Yu
Affiliation:
Department of Chemical Engineering, The Ohio State University Columbus, OH 43210, USA
Kurt W. Koelling
Affiliation:
Department of Chemical Engineering, The Ohio State University Columbus, OH 43210, USA
Marc J. Madou
Affiliation:
Nanogen Inc., San Diego, CA 92121, USA
Get access

Abstract

In this paper, we review the approaches developed in our laboratory for polymer-based micro/nanofabrication. For fabrication of microscale features, UV-LIGA (UV-lithography, electroplating, and molding) technology was applied for low-cost mass production. For fabrication of sub-micron or nanoscale features, a novel nano-manufacturing protocol is being developed. The protocol applies a novel nano-lithography imprinting process on an ultra-precision motion-control station. It is capable of economically producing well-defined pores or channels at the nanometer scale on thin polymer layers. The formed thin layers can be used as nano-filters for chemical or bio-separation. They can also be integrated into miniaturized devices for cell immunoprotection or tissue growth. For bonding of polymer-based microfluidic platforms, a novel resin-gas injection-assisted technique has been developed that achieves both bonding and surface modification. This new approach can easily seal microfluidic devices with micron and sub-micron sized channels without blocking the flow path. It can also be used to modify the channel shape, size, and surface characteristics (e.g., hydrophilicity, degree of protein adsorption). By applying the masking technique, local modification of the channel surface can be achieved through cascade resin-gas injection.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable