Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T09:42:15.167Z Has data issue: false hasContentIssue false

Micro-Fracture testing of Ni-W Microbeams Produced by Electrodeposition and FIB Machining

Published online by Cambridge University Press:  26 February 2011

David Armstrong
Affiliation:
david.armstrong@materials.ox.ac.uk, University Of Oxford, Materials Department, Parks Road, oxford, OX1 3PH, United Kingdom, 01865273768
Abdul Haseeb
Affiliation:
haseeb@mme.buet.ac.bd, Bangladesh University of Engineering and technology, Dhaka, N/A, Bangladesh
Angus Wilkinson
Affiliation:
angus.wilkinson@materials.ox.ac.uk, Oxford University, Materials Department, Parks Road, Oxford, OX1 3PH, United Kingdom
Steve Roberts
Affiliation:
steve.roberts@materials.ox.ac.uk, Oxford University, Materials Department, Parks Road, Oxford, OX1 3PH, United Kingdom
Get access

Abstract

Electrodeposited nickel-tungsten alloys are being considered as a candidate material for components for microelectromechanical systems (MEMS) fabricated by the LIGA (German acronym for lithography, electrodeposition, and forming) technology. In spite of having a useful range of properties including; hardness and strength, better tribological and chemical resistance and improved high temperature resistance as compared with the conventionally used electrodeposited Ni, these alloys possess certain brittleness. In this study, the fracture toughness of Ni-17.5 at%W alloy microcantilever beams (dimension: 60µm × 20µm x 14µm) fabricated by UV lithography and electrodeposition and notched by focused ion beam machining is investigated. Load was applied to the beams using a nanoindenter, which also allowed accurate positioning of the sample. Fracture toughness was calculated from the fracture load assuming a linear elastic behaviour. The Ni-W alloy beams were found to possess a mean fracture toughness of 2.97 MPa √m. The fracture toughness of Ni-W alloy is found to be higher than that of Si - another important MEMS material, but considerably lower than that of electrodeposited nickel and nickel base alloys.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable