Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T11:30:15.487Z Has data issue: false hasContentIssue false

Micromechanical Studies of Model Metal Matrix Composites

Published online by Cambridge University Press:  22 February 2011

H. N. G. Wadley
Affiliation:
National Bureau of Standards, Gaithersburg, MD 20899
F. S. Biancaniello
Affiliation:
National Bureau of Standards, Gaithersburg, MD 20899
R. B. Clough
Affiliation:
National Bureau of Standards, Gaithersburg, MD 20899
Get access

Extract

The fiber-matrix interface is believed to play a central role in the load-supporting and crack-growth resisting capabilities of fiber-reinforced high temperature composites. In metal matrix composites, this interface can be very complex: new phases may be present due to reactions between the matrix and reinforcement, compositional gradients due to interdiffusion occur, and the outer fiber surface is usually coated to avoid handling damage, improve fiber wetability, and/or control matrix reactivity. Attempts at measurements of fiber and interface strength from studies of actual composite samples are thwarted in part by the difficulty of determining the local distribution of stress and strain in these highly inhomogeneous materials. Furthermore, the inability to determine the point, during loading, where failure occurs in the interfacial zone also complicates the problem in these opaque materials. It is not surprising, therefore, that the fundamental relationships between the structure and properties of interfaces, on the one hand, and the load-supporting/crack-resisting properties of bulk metal matrix composities, on the other, have not been determined to date.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable