Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T12:27:47.391Z Has data issue: false hasContentIssue false

A Microstruciure Investigation on Rapidly Solidified Ni3Al Containing Boron

Published online by Cambridge University Press:  21 February 2011

K.M. Ciiang
Affiliation:
General Electric Corporate Research and Development, Schenectady, New York, 12301 USA
S.C. Huang
Affiliation:
General Electric Corporate Research and Development, Schenectady, New York, 12301 USA
A.I. Taub
Affiliation:
General Electric Corporate Research and Development, Schenectady, New York, 12301 USA
Get access

Abstract

A small amount of boron addition in rapidly solidified Ni3 Al has been found to yield remarkable improvements in bolh room-temperature strength and ductility. In this study, the microstructure of melt-spun Ni3Al ribbons with various boron modifications ranging from 0 to 6.0 at% was investigated in detail by using transmission electron microscopy. All alloy compositions studied reveal a completely ordered fcc L12 matrix phase, in which polygonized dislocation networks and subgrain boundaries are observed. The boron-free Ni3 Al contains a dispersion of an Al-rich martensitic phase consisting of alternate twins. The boron addition tends to suppress the formation of the martensitic phase, but excessive boron (≥ 2.0 at%) causes the precipitation of M23B6 type borides.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable