Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T19:08:18.358Z Has data issue: false hasContentIssue false

Microstructural Effect on Environmental Embrittlement of Isothermally Forged TiAl-Based Intermetallic Alloys

Published online by Cambridge University Press:  11 February 2011

T. Takasugi
Affiliation:
Department of Metallurgy and Materials Science, Graduate School of Engineering, Osaka Prefecture University, 1–1 Gakuen-cho, Sakai, Osaka 599–8531, Japan
T. Tsuyumu
Affiliation:
Department of Metallurgy and Materials Science, Graduate School of Engineering, Osaka Prefecture University, 1–1 Gakuen-cho, Sakai, Osaka 599–8531, Japan
Y. Kaneno
Affiliation:
Department of Metallurgy and Materials Science, Graduate School of Engineering, Osaka Prefecture University, 1–1 Gakuen-cho, Sakai, Osaka 599–8531, Japan
H. Inoue
Affiliation:
Department of Metallurgy and Materials Science, Graduate School of Engineering, Osaka Prefecture University, 1–1 Gakuen-cho, Sakai, Osaka 599–8531, Japan
Get access

Abstract

The TiAl-based (Ti-46Al-7Nb-1.5Cr (at%)) intermetallic alloy was tensile tested in vacuum and air as a function of temperature to investigate microstructural effect on the moisture-induced embrittlement. The reduction in tensile strength (or elongation) due to testing in air diminishes as testing temperature increases. From the fracture strength (or elongation)-temperature curves, it was found that the near gamma grain microstructure was most resistant, and the dual-phase microstructure most susceptible to moisture-induced embrittlement. Also, the moisture-induced embrittlement of the TiAl-based intermetallic alloy with fully lamellar microstructure depends on the lamellar spacing, and reduced with decreasing lamellar spacing.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable