Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T10:07:49.758Z Has data issue: false hasContentIssue false

The Microstructure and Electromigration Performance of Damascene-Fabricated Aluminum Interconnects

Published online by Cambridge University Press:  10 February 2011

Paul R. Besser
Affiliation:
Advanced Process Development, Advanced Micro Devices, Inc., Sunnyvale, CA
John E. Sanchez Jr
Affiliation:
Materials Science Department, University of Michigan, Ann Arbor, MI
David P. Field
Affiliation:
TexSEM Laboratories, Inc., Provo, UT
Shekhar Pram Anick
Affiliation:
Technology Reliability Development, Advanced Micro Devices, Sunnyvale, CA
Kashmir Sahota
Affiliation:
Advanced Process Development, Advanced Micro Devices, Inc., Sunnyvale, CA
Get access

Abstract

Novel metal deposition stack and damascene processing methods have been used to fabricate electrically isolated parallel arrays of 1.0 νm deep aluminum-alloy interconnect trenches varying in width from 0.5 μm to 16 μm. The grain size and crystallographic texture of the Al in these trenches has been characterized using transmission electron microscopy (TEM) and local electron backscattered diffraction (EBSD), respectively. Narrow lines (0.5 and 1.0 μm wide) have a bamboo microstructure, intermediate widths (2.0 μm wide) are nearly bamboo, and wide lines (4.0 μm and wider) are polycrystalline. The <111> texture of the lines degrades with decreasing linewidth. A secondary <100> component is demonstrated and its origin proposed. The electromigration reliability of the narrow damascene Al lines was measured, and the observed enhancement of damascene Al interconnects compared to conventionally-fabricated Al interconnects is correlated with the microstructure.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable