Hostname: page-component-74656f9884-npj9w Total loading time: 0 Render date: 2026-11-10T11:30:07.971Z Has data issue: false hasContentIssue false

Microstructure and Fracture At the Cement Paste-Aggregate Interface

Published online by Cambridge University Press:  21 February 2011

L. Struble*
Affiliation:
Center for Building Technology, National Bureau of Standards, Gaithersburg, MD 20899.
Get access

Abstract

The mechanical behavior of concrete is thought to be affected by the microstructure of the paste-aggregate interface, which differs in several respects from the microstructure of bulk paste. General aspects of interfacial microstructure, which appear to be fairly well understood, are reviewed. Recent microstructural studies using backscattered electron imaging show that there is a zone along the interface (approximately 50 μm wide) within which there are generally few large unhydrated clinker grains, many large voids (greater than 5 μm), a generally porous microstructure, many hollow-shell hydration grains, and in some cases little calcium hydroxide. The tendency for cracks to develop or grow along the paste-aggregate interface is discussed in relation to specific features of the interfacial microstructure.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable