Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T14:42:29.128Z Has data issue: false hasContentIssue false

Microstructure and Leaching Characteristics of a Technetium Containing Metal Waste Form

Published online by Cambridge University Press:  10 February 2011

S. G. Johnson
Affiliation:
Argonne National Laboratory-West P.O. 2528 Idaho Falls, ID 83403
D. D. Keiser
Affiliation:
Argonne National Laboratory-West P.O. 2528 Idaho Falls, ID 83403
M. Noy
Affiliation:
Argonne National Laboratory-West P.O. 2528 Idaho Falls, ID 83403
T. O'Holleran
Affiliation:
Argonne National Laboratory-West P.O. 2528 Idaho Falls, ID 83403
S. M. Frank
Affiliation:
Argonne National Laboratory-West P.O. 2528 Idaho Falls, ID 83403
Get access

Abstract

Argonne National Laboratory is developing an electrometallurgical treatment for spent fuel from the experimental breeder reactor II. A product of this treatment process is a metal waste form that incorporates the stainless steel cladding hulls, zirconium from the fuel and the fission products that are noble to the process, i.e., Tc, Ru, Pd, Rh, Ag. The nominal composition of this waste form is stainless steel/15 wt% zirconium/ 1–4 wt% noble metal fission products. The behavior of technetium is of particular importance from a disposal point of view for this waste form due to its long half life, 2.14E5 years, and its mobility in groundwater. To address these concerns a limited number of spiked metal waste forms were produced containing Tc. These surrogate waste forms were then studied using scanning electron microscopy (SEM) and selected leaching tests.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable