Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-15T20:46:25.447Z Has data issue: false hasContentIssue false

Microstructure and Lifetime Study of Al/Y Films

Published online by Cambridge University Press:  10 February 2011

L. Vedula
Affiliation:
Clemson University, Clemson, SC 29634
V. Pillai
Affiliation:
Clemson University, Clemson, SC 29634
V. S. Nimmagadda
Affiliation:
Clemson University, Clemson, SC 29634
R. Singh
Affiliation:
Clemson University, Clemson, SC 29634
K. F. Poole
Affiliation:
Clemson University, Clemson, SC 29634
H. Gao
Affiliation:
Oak Ridge National Laboratory, Oak Ridge, TN 37831
S. J. Pennycook
Affiliation:
Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

Thin Al films alloyed with three different compositions (0.1%, 1%, 5% by weight) of Yttrium were deposited by D.C. Magnetron Sputtering onto oxidized Si wafer substrates. The samples were furnace annealed at 425 °C for 30 minutes. Resistivity measured for the as-deposited and annealed Al(0. lwt% Y) were 3.07 and 2.57+/−0.25 μΩcm respectively. Al(0. lwt% Y) was also annealed by furnace annealing (FA), rapid thermal annealing (RTA) and rapid photothermal annealing (RPA). RPA gave a residual resistivity of 2.67μΩcm in 5 minutes and at a temperature of 350 C for Al(0. lwt% Y). Mean time to failure for AI(0. lwt% Y) samples at a current density of 3.2+/−0.5×106A/cm2 at 30 C was 50 hours. TEM results showed grain size variation from 0.5 to 2 μm.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable