Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-15T01:48:08.164Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure and Mechanical Properties of Oxide Eutectic Fibers

Published online by Cambridge University Press:  21 February 2011

S. D. Durbin,
A. Yoshikawa,
K. Hasegawa,
J.-H. Lee,
B. M. Epelbaum,
T. Fukuda and
Y. Waku
S. D. Durbin
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan
A. Yoshikawa
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan
K. Hasegawa
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan
J.-H. Lee
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan
B. M. Epelbaum
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan
T. Fukuda
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan
Y. Waku
Affiliation:
Japan Ultra-high Temperature Materials Research Center Ube 755-0001, Japan
Get access

Abstract

Some oxide eutectic materials, such as sapphire/YAG, display an intricate “Chinese script” microstructure which strongly influences properties such as mechanical strength. We used the micro pulling-down technique to grow fibers of a series of such materials at rates over 20 mm/min, giving a uniform microstructure with a characteristic size as low as 150 nm. Bulk and surface characteristics of this microstructure were investigated by electron and atomic force microscopy. Smaller microstructure size gave higher tensile strength at 1500°C. Annealing of the fibers produced some coarsening of the microstructure, but increased the strength at lower temperatures.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 581: Symposium F – Nanophase & Nanocomposite Materials II , 1999, 577
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1] Stubican, V.S. and Bradt, R.C., Ann. Rev. Mater. Sci. 11, 267 (1981).Google Scholar
[2] Wu, P. and Pelton, A. D., J. Alloys and Comp. 179, 259 (1992).Google Scholar
[3] Viechniki, D. and Schmid, F., J. Mater. Sci. 4, 84 (1969).Google Scholar
[4] Epelbaum, B.M., Yoshikawa, A., Shimamura, K., Fukuda, T., Suzuki, K. and Waku, Y., Journal of Crystal Growth, 198/199, 471 (1999).Google Scholar
[5] Yoshikawa, A., Epelbaum, B. M., Hasegawa, K., Durbin, S. D., Fukuda, T., J. Cryst. Growth 205, 305 (1999).Google Scholar
[6] Yoshikawa, A., Epelbaum, B. M., Fukuda, T., Suzuki, K., and Waku, Y., Jpn. J. Appl. Phys. 38, L1623 (1999).Google Scholar
[7] Hasegawa, K., Yoshikawa, A., Durbin, S. D., Epelbaum, B. M., Fukuda, T. and Waku, Y., J. Korean Assoc. Cryst. Growth 9, 432 (1999).Google Scholar
[8] Feigelson, R. S., Mater. Sci. Eng. B 1, 67 (1988).Google Scholar