Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T20:18:11.518Z Has data issue: false hasContentIssue false

Microstructure Dependence of Hydrogen Sensing Properties of Palladium Functionalized Tungsten Oxide Films

Published online by Cambridge University Press:  09 January 2012

Meng Zhao
Affiliation:
Department of Applied Physics and Materials Research Center, The Hong Kong Polytechnic University, Hong Kong, P.R.C.Department of Electronic Science and Technology, Changzhou University, Changzhou, P.R.C.
Jian-Xing Huang
Affiliation:
Department of Applied Physics and Materials Research Center, The Hong Kong Polytechnic University, Hong Kong, P.R.C.
Chung-Wo Ong
Affiliation:
Department of Applied Physics and Materials Research Center, The Hong Kong Polytechnic University, Hong Kong, P.R.C.
Get access

Abstract

Tungsten oxide (WO3) films were prepared by using magnetron sputtering. Substrate temperature and sputtering pressure were adjusted to vary the microstructure. The films were found to contain nanoclusters; while their size L, and porosity θ and surface roughness zRMS of the film can be varied. After adding a palladium coating on the film surface, the hydrogen (H2) sensing properties of the films, including sensitivity of detection, response time and recovery time were measured. Their dependences on L, θ and zRMS were analyzed and interpreted. The information achieved is useful for improving H2 sensor technology.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable