Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T11:22:01.769Z Has data issue: false hasContentIssue false

Microstructure of the Intermetallic Compounds Al3(Ti1-XMx)

Published online by Cambridge University Press:  22 February 2011

K. Kita
Affiliation:
Graduate School, Department of Materials Science, The University of Tokyo, 7–3–1 Hongo, Bunkyo-Ku, Tokyo, 113 Japan
G. Itoh
Affiliation:
Department of Materials Science, The University of Tokyo, 7–3–1 Hongo, Bunkyo–Ku, Tokyo, 113 Japan
M. Kanno
Affiliation:
Department of Materials Science, The University of Tokyo, 7–3–1 Hongo, Bunkyo–Ku, Tokyo, 113 Japan
Get access

Abstract

An attempt was made to change the crystal structure of the intermetallic compound Al3Ti from DO22 to Ll2, by replacing Ti with several alloying elements. The alloying elements chosen in this study were Sc, Er and Lu with which Al forms intermetallic compounds having LI, structure. Ingots weighing about 50g of Al3(Ti1-xMx) — M represents alloying element and the x value is 0, 0.25 or 0.5 — were melted in an argon plasma arc furnace. X-ray diffraction, energy dispersive spectroscopy and scanning electron and optical microscopy were carried out to examine the microstructurc in relation to the kind and amount of alloying elements. Microstructural observation revealed the occurrence of an Ll2 phase in all M bearing alloys. Compression tests were also carried out to assess the ductility of these alloys. The results showed that the Sc alloying is effective to increase the room temperature ductility of Al3Ti.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable