Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T07:23:51.941Z Has data issue: false hasContentIssue false

Microstructure Origin for Thermal Fatigue of TiNi Films

Published online by Cambridge University Press:  21 March 2011

Shulin Wen
Affiliation:
HREM Analytical Center, College of Mater. Sci. & Eng., Shandong University 73 Jingshi Rd., Jinan, Shandong, 250061, CHINA
Jibao He
Affiliation:
HREM Analytical Center, College of Mater. Sci. & Eng., Shandong University 73 Jingshi Rd., Jinan, Shandong, 250061, CHINA
Get access

Abstract

In order to improve the performance and prolong the life of shape memory alloy material (SMA), it is very important to trace and study the microstructure change on the fatigue of SMA. The microstructure features between the samples before and after thermal fatigue (about 100,000 thermal cycles) of the NiTi-SMA films were examined and compared with each other by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). It was found that there is no difference of microstructures between the two kinds of samples except some precipitates appeared in the fatigue specimen. These precipitates which may be identified as TiNi3 phase with a grain size of 10-20 nm may impede transformation from martensite to austenite which works as mechanism of SMA during thermal fatigue. Therefore, these precipitates result in the serious decay on SMA performance and further fracture of the SMA material.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable