Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-14T23:20:11.827Z Has data issue: false hasContentIssue false
  • English
  • Français

Microwave and Millimeter wave Processing of Polymer-Derived Silicon Nitride

Published online by Cambridge University Press:  10 February 2011

S. T. Schwab,
S. F. Timmons,
C. R. Blanchard,
M. D. Grimes,
R. C. Graef,
J. D. Katz,
D. E. Rees and
T. W. Hardek
S. T. Schwab
Affiliation:
Materials & Structures Division, Southwest Research Institute, San Antonio, TX 78228-0510
S. F. Timmons
Affiliation:
Materials & Structures Division, Southwest Research Institute, San Antonio, TX 78228-0510
C. R. Blanchard
Affiliation:
Materials & Structures Division, Southwest Research Institute, San Antonio, TX 78228-0510
M. D. Grimes
Affiliation:
Materials & Structures Division, Southwest Research Institute, San Antonio, TX 78228-0510
R. C. Graef
Affiliation:
Materials & Structures Division, Southwest Research Institute, San Antonio, TX 78228-0510
J. D. Katz
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
D. E. Rees
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
T. W. Hardek
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
Get access

Abstract

Chemical methods of processing ceramics have the potential to overcome many of the processing-related obstacles that have hindered widespread commercialization. The Southwest Research Institute (SwRI) has focused on the development of polymeric precursors to silicon nitride (Si3N4). One such precursor, perhydropolysilazane (or PHPS), has been shown to be a useful binder for Si3N4 powder processing, a useful matrix precursor for the polymer infiltration/pyrolysis (PIP) processing of fiber-reinforced Si3N4, and a useful ceramic coating precursor for the repair of oxidation protection coatings on carbon-carbon composites. While conventional, thermal pyrolyses of these preceramnics has been sufficient to demonstrate their potential, substantial cost savings could be realized if the polymer-to-ceramic conversion could be instigated with electromagnetic energy. We have investigated the use of millimeter wave heating as a means of converting PHPS into Si3N4, and report here the results of our efforts to produce bulk compacts, coatings, and fiber-reinforced ceramics.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 430: Symposium O – Microwave Processing of Materials V , 1996, 619
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. a) Abraham, T., Ind. Ceram., 13, p. 82 (1993); b) V. DeSapio, Chemtech, p. 46 (November, 1993).Google Scholar
2. Wynne, K.J. and Rice, R.W., Ann. Rev. Mat. Sci., 14, p. 297 (1984).Google Scholar
3. a) Ziegler, G., Heinrich, J., and Wötting, G., J. Mater. Sci., 22, p. 3041 (1987); b) C. Boberski, R. Hamminger, M. Peuckert, F. Aldinger, R. Dillinger, J. Heinrich, and J. Huber, Angew. Chem. Int. Ed. Engl. Adv. Mater., 28, p. 1560 (1989).Google Scholar
4. a) Schwab, S.T. and Blanchard-Ardid, C.R., Mat. Res. Soc. Symp. Proc., 121, p. 581 (1988); b) Schwab, S.T., Blanchard, C.R., and Graef, R.C., J. Mat. Sci., 29, p. 6320 (1994).Google Scholar
5. Schwab, S.T., Graef, R.C., Pan, Y-M., Curry, D.M., Pham, V.T., Milhoan, J.D., and Tillian, D.J. (Proceedings of the 39th International SAMPE Symposium (Closed Session), Society for the Advancement of Material and Process Engineering, Covina, CA, 1994) p. 68.Google Scholar
6. a) Shriver, D.F. and Drezdzon, M.A., The Manipulation of Air-Sensitive Compounds, 2nd ed. (John Wiley, New York, 1986); b) A.L. Wayda and M.Y. Darensbourg, Experimental Organometallic Chemistry (ACS Symposium Series 357, American Chemical Society: Washington, DC, 1987 ).Google Scholar
7. Katz, J.D. and Rees, D.E., Cer. Trans, 59, p. 141 (1995).Google Scholar
8. Schwab, S.T., U.S. Patent No. 5 294 425 (15 March 1994).Google Scholar
9. Schwab, S.T., Davidson, D.L., Pan, Y-M., and Graef, R.C., PIP Processing and Properties of Nicalon-Reinforced Silicon Nitride (Proceedings of the 39th International SAMPE Symposium (Closed Session), Society for the Advancement of Material and Process Engineering, Covina, CA, 1994) p. 53.Google Scholar
10. Blanchard, C.R., Schwab, S.T., J. Am. Cer. Soc., 77, p. 1729 (1994).Google Scholar