Hostname: page-component-74656f9884-8r8nv Total loading time: 0 Render date: 2026-11-10T10:33:45.219Z Has data issue: false hasContentIssue false
  • English
  • Français

Microwave Processing of Polymers - An Overview

Published online by Cambridge University Press:  25 February 2011

David A. Lewis
David A. Lewis*
Affiliation:
IBM Corp., T.J.Watson Research Center, P.O. Box 218, Yorktown Heights, NY 10598
Get access

Abstract

This paper surveys some of the recent research into the microwave processing of polymers. The mechanism of coupling of the radiation with polymers is described and a historical perspective is presented on the development of this technology from the 1960's when the processing of rubber was first initiated, to current research in high performance materials and composites. The controversial area of microwave effects on processing is also discussed.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 269: Symposium L – Microwave Processing of Materials III , 1992 , 21
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1] Akyel, C. and Bilgen, E., in: Energy vol. 14, (1989) 839–851.CrossRefGoogle Scholar
[2] Simonian, J. L., Microwave Curing of Insulating Varnish on Armatures Stators and Transformers Proceedings of 14th Electron Insul Conf, (IEEE, 1979) 105–109.Google Scholar
[3] Chabinsky, J. L., Applications of Microwave Energy-Past, Present and Future-“Brave New Worlds”, eds. Sutton, W. H., Brooks, M. H., and Chabinsky, I. J., (Materials Research Society, 1988) 17–29.Google Scholar
[4] Lee, W. I. and Springer, G., in: J. Composite Alaterials vol. 18, (1984) 257–386.Google Scholar
[5] Lee, W. I. and Springer, G., in: J. Composite Materials vol. 18, (1984) 387–409.CrossRefGoogle Scholar
[6] Wei, J., Hawley, M. C., Jow, J., and DeLong, J. D., in: SAMPE J. vol. 27, (1991) 33–39.Google Scholar
[7] Methven, J. M. and Ghaffariyan, S. R., in: PMSE Prepr. vol. 66, (1992) 389–390.Google Scholar
[8] Nakagawa, K. and Yamakawa, S., in: J. Polym. Sci.,Polym. Lett. Ed. vol. 21, (1983) 933–935.CrossRefGoogle Scholar
[9] Takeuchi, Y., Yamamoto, F., Nakagawa, K., and Yamakawa, S., in: J. Polym. Sci.,Polym. Phys. Ed. vol. 23, (1985) 1193–1200.CrossRefGoogle Scholar
[10] Nakagawa, K., Konaka, T., and Yamakawa, S., in: Polymer vol. 26, (1985) 84–88.CrossRefGoogle Scholar
[11] Nakagawa, K. and Amano, M., in: Polymer vol. 28, (1987) 263–268.CrossRefGoogle Scholar
[12] Nakagawa, K. and Amano, M., in: Polym. Commun. vol. 28, (1987) 119–120.CrossRefGoogle Scholar
[13] Hedrick, J. L., Yilgor, I., Wilkes, G. L., and McGrath, J. E., in: Polym. Bull. vol. 13, (1985) 201.CrossRefGoogle Scholar
[14] Hedrick, J. C., Lewis, D. A., Ward, T. C., and McGrath, J. E., in: Polym. Prepr. vol. 29, (1988) 363–365.Google Scholar
[15] Hedrick, I. C., Lewis, D. A., Lyle, G. D., Ward, T. C., and McGrath, J. E., in: Fourth Technical Conference, Proceedings of the American Society for Composites (1990) 167–176.Google Scholar
[16] Rodrigues, D. E. and Wilkes, G. L., in: PMSE Prepr. vol. 66, (1992) 384–385.Google Scholar
[17] Lewis, D. A., Hedrick, J. C., Ward, T. C., and McGrath, J. E., in: Polym. Prepr. vol. 28, (1987) 330–331.Google Scholar
[18] Lewis, D. A., Ward, T. C., Summers, J. D., and McGrath, J. E., in: Polym. Prepr. vol. 29, (1988) 174–175.Google Scholar
[19] Hedrick, J. C., Lewis, D. A., Lyle, G. D., Wu, D., Ward, T. C., and McGrath, J. E., in: PMSE Prepr. vol. 60, (1989) 438–442.Google Scholar
[20] Lewis, D. A., Ward, T. C., Summers, J. D., and McGrath, J. E., in: J. Polym. Sci., Polym. Chem. Ed. vol. 30, (1992) 1647–1653.CrossRefGoogle Scholar
[21] DeLong, J. D., Jow, J., and Hawley, M. C.. presented at 2nd Topical Conference on Emerging Technologies in Materials San Francisco, 1989.Google Scholar
[22] Mijovic, J. and Wijaya, J., in: Alacromolecules vol. 23, (1990) 3671–3674.CrossRefGoogle Scholar
[23] Chan, L. and Gourdenne, A., in: PAISE Prepr. vol. 66, (1992) 382–383.Google Scholar
[24] Gourdenne, A., in: PMSE Prepr. vol. 66, (1992) 430–431.Google Scholar
[25] Thuillier, F. M., Jullien, H., and Grenier-Loustalot, M.-F., in: Polym. Commun. vol. 27, (1986) 206–208.Google Scholar
[26] Agrawal, R. K. and Drzal, L. T., in: .1. Adhesion vol. 29, (1989) 63–79.CrossRefGoogle Scholar
[27] Ippen, J., in: Rubber Chem. Technol. vol. 44, (1971) 294–306.CrossRefGoogle Scholar
[28] Schwarz, H. F., Bosisio, R. G., Wertheimer, M. R., and Couderc, D., in: J. Microwave Power vol. 8, (1973) 303–322.CrossRefGoogle Scholar
[29] Schwarz, H. F., Bosisio, R. G., Wertheimer, M. R., and Couderc, D., in: Rubber Age vol. 107, (1975) 27–38.Google Scholar
[30] Gourdenne, A., Maassarani, A.-H., Monchoux, P., Aussudre, S., and Thourel, L., in: Polyni. Prep. vol. 20, (1979) 471–474.Google Scholar
[31] Van, Q. L. and Gourdenne, A., in: Eur. Polym. J. vol. 23, (1987) 777–780.CrossRefGoogle Scholar
[32] Chen, M., Ward, T. C., and McGrath, J. E., in: PMSE Prepr. vol. 60, (1989) 443–447.Google Scholar
[33] DeMuse, M. T., in: PMSE Prepr. vol. 66, (1992) 428–429.Google Scholar
[34] Lyle, G. D., Hedrick, J. C., Lewis, D. A., Senger, J. S., Chen, D. H., Wu, S. D., and McGrath, J. E., Synthesis and Characterisation of Maleimide Terminated Poly(Arylene ether ketone)s, eds. Feger, C., Khojasteh, M.M., and McGrath, J.E., (Elsevier, Amsterdam, 1989) 213–227.Google Scholar
[35] Jordan, C., Galy, J., Pascault, J.P., More, C., and Delmotte, M., in: PMSE Prepr. vol. 66, (1992) 380–381.Google Scholar
[36] Jullien, H. and Petit, A., in: PMSE Prepr. vol. 66, (1992) 378–380.Google Scholar
[37] Mijovic, J., Wijaya, J., and Fishbain, A., in: Poly. Prepr. vol. 32, (1991) 366–367.Google Scholar
[38] Booske, J. H., Cooper, R. F., and Dobson, I., in: J. Mater. Res. vol. 7, (1992) 495–501.CrossRefGoogle Scholar