Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T23:50:49.536Z Has data issue: false hasContentIssue false

Microwave Pyrolysis of Emulsified Ceramic Precursor Ocompounds

Published online by Cambridge University Press:  15 February 2011

M. Willert-Porada
Affiliation:
University Dortmund, Department of Chemical Engineering, Div. of Materials Science, D-44221 Dortmund, Germany
S. Dennhöfer
Affiliation:
University Dortmund, Department of Chemical Engineering, Div. of Materials Science, D-44221 Dortmund, Germany
D. Hachmeister
Affiliation:
University Dortmund, Department of Chemical Engineering, Div. of Materials Science, D-44221 Dortmund, Germany
Get access

Abstract

Application of paraffin as a MW-transparent matrix for microwave pyrolysis of metalorganic compounds enables synthesis of large quantities of nanosized powders with excellent storability and packing behavior. Fully crystalline, nanosized t-ZrO2 powders with specific surface area > 200 m 2 g -1 are obtained from Zr-alcoholate, and alumina powders with > 500 m2g-1 from Al-alcoholates. Some differences exist between microwave pyrolysis and conventional pyrolysis of such mixtures. Powders from microwave pyrolysis transform at lower calcination temperature to α-A12O3 and exhibit after calcination a more homogeneous morphology as compared to powders from conventional pyrolysis. Furthermore, a different composition of the volatile pyrolysis products is found. t-ZrO2 powder from the microwave processing route exhibits an increased stability towards transformation to monoclinic ZrO2 as well as smaller initial grain sizes than a conventionally synthesized powder.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable