Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T18:02:02.483Z Has data issue: false hasContentIssue false

Microwave Sintering of Continuous Zirconia Ceramic Fibers

Published online by Cambridge University Press:  15 February 2011

Gerald. J. Vogt
Affiliation:
Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87545
Wesley. P. Unruh
Affiliation:
Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87545
Ross. H. Plovnick
Affiliation:
3M Ceramic Technology Center, 201–4N-01 3M Center, St. Paul, MN 55144
Get access

Abstract

Continuous yttria-stabilized zirconia ceramic fibers approximately 10–15 μm in diameter have been rapidly sintered by pulling them through a tuned, 2.45 GHz single-mode TE103 microwave cavity in ambient air. The resulting fibers were analyzed by X-ray diffraction, scanning electron microscopy, and single-filament tensile tests. They were found to be unsplit, to have a submicron grain structure and a tetragonal crystal structure, and to exhibit considerable strength and flexibility.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable