Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T03:40:44.636Z Has data issue: false hasContentIssue false

Misfit Strain Driven Phase Transformations in Epitaxial Barium Strontium Titanate Films

Published online by Cambridge University Press:  01 February 2011

Z.-G. Ban
Affiliation:
Department of Metallurgy and Materials Engineering and Institute of Materials Science University of Connecticut, Storrs, CT 06269
S. P. Alpay
Affiliation:
Department of Metallurgy and Materials Engineering and Institute of Materials Science University of Connecticut, Storrs, CT 06269
Get access

Abstract

We develop phase diagrams for single domain epitaxial barium strontium titanate films on cubic substrates as a function of the misfit strain based on a Landau-Devonshire phenomenological model similar to the one developed by Pertsev et al. [Phys. Rev. Lett. 80, 1988 (1998)]. Unusual ferroelectric phases that are not possible in single crystals and bulk ceramics are demonstrated in epitaxially constrained BST films. The misfit strain is correlated with the film thickness quantitatively by taking into account the formation of misfit dislocations that relieve epitaxial stresses during deposition. Theoretical estimation of the dielectric constant of (001) Ba0.7Sr0.3TiO3 and Ba0.6Sr0.4TiO3 films grown on Si, MgO, LaAlO3, and SrTiO3 substrates as a function of film thickness is provided. It is shown that the selection of the substrate and the film thickness can be chosen as design parameters to manipulate the internal stress level in the film to achieve enhanced dielectric response.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable