Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T07:52:37.362Z Has data issue: false hasContentIssue false

A Model for the Yield Behavior of Ni3Ai Alloys

Published online by Cambridge University Press:  26 February 2011

Arnaud de Bussac
Affiliation:
Mechanical Properties Research Laboratory, School of Materials Engineering, Georgia Institute of Technology, Atlanta, GA. 30332–0245
Graham Webb
Affiliation:
Mechanical Properties Research Laboratory, School of Materials Engineering, Georgia Institute of Technology, Atlanta, GA. 30332–0245
Stephen D. Antolovich
Affiliation:
Mechanical Properties Research Laboratory, School of Materials Engineering, Georgia Institute of Technology, Atlanta, GA. 30332–0245
Get access

Abstract

Current models for predicting the unusual deformation characteristics of Ni3Al alloys are based upon the idea of cross-slip pinning of screw dislocation segments. These models assume an Arrhenius type framework which employs a stress-modified activation barrier for forward cross slip. Use of such models has been successful in describing the orientation, asymmetry and temperature characteristics of yielding. A limitation of current models is their inability to predict the apparent lack of a strain rate effect in Ni3Al alloys. The current model approaches the problem using both kinetic and thermodynamic arguments to describe the physical process. It is then demonstrated that the driving force for cross-slip controls the process. The model describes all aspects of deformation including apparent strain rate insensitivity. An additional feature of the model is its ability to provide analytical and physical justification for the use of Arrhenius type equations for representing experimental data.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable