Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T01:26:35.687Z Has data issue: false hasContentIssue false

A Model of Crack Propagation in a 2D Heterogeneous Material

Published online by Cambridge University Press:  10 February 2011

P. Daguier
Affiliation:
O.N.E.R.A. (OM), 29 Avenue de la Division Leclerc, B.P. 72, 92322 Châtillon Cedex, FRANCE
E. Bouchaud
Affiliation:
O.N.E.R.A. (OM), 29 Avenue de la Division Leclerc, B.P. 72, 92322 Châtillon Cedex, FRANCE
G. Lapasset
Affiliation:
O.N.E.R.A. (OM), 29 Avenue de la Division Leclerc, B.P. 72, 92322 Châtillon Cedex, FRANCE
Get access

Abstract

A continuous numerical model of pure mode I crack propagation in a bidimensional heterogeneous material is presented. This model describes the propagation of a macrocrack into a two-phases brittle material containing a finite density of second phase precipitates. The morphology of cracks produced for various mechanical and microstructural conditions is analysed. It is shown that the simulated cracks are self-affine with a roughness index ≃ 0.6 independent of the microstructure. Relevant length scales, on the contrary, strongly depend on the microstructural parameters, and indicate an optimum density leading to a maximum fracture toughness.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable