Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-14T10:02:34.741Z Has data issue: false hasContentIssue false
  • English
  • Français

Model-Informed Microwave Processing of Materials

Published online by Cambridge University Press:  28 February 2011

W.A. Geoffrey Voss and
H.K. Kua
W.A. Geoffrey Voss
Affiliation:
Electrical Engineering Department, University of Alberta, Edmonton, Alberta, Canada T6G 2G7
H.K. Kua
Affiliation:
Electrical Engineering Department, University of Alberta, Edmonton, Alberta, Canada T6G 2G7
Get access

Abstract

This paper reviews the expanding application of microwaves for processing solid materials, both natural and synthetic. The Canadian interest ranges from food processing to forest products, ceramic drying and curing to the preprocessing of rare minerals and ores, with the zeolite family of particular industrial interest.

In all cases, across the world, the number of process variables is large and the known physical data are limited. Yet the engineer requires to know only a few specific properties which, in general, involve rate and limit functions. The problem posed here, which has to be considered as a part of the unification of the subject of electromagnetic heating, concerns the careful use of atomistic modelling to achieve a model-informed empiricism for process development. As an example, it is shown in this paper that the majority of solids have the same piecewise linear approximate temperature model for absorbing and reflecting power: more than twenty variables affecting the dielectric properties can then be reduced to five or six which need to be measured. Correctly interpreted, this approach (due, in its broad philosophic format, to M.F. Ashby, 1987) may help solve many electromagnetic engineering problems, including those associated with breakdown and thermal-runaway.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 189: Symposium L – Microwave Processing of Materials II , 1990, 3
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Sutton, W.H., Ceramic Bull. 68(2), 376–386 (1989).Google Scholar
2. Sanio, M.R. and Michelussi, I., Microwave Applications in the Food and BeveraQe Industry (Ontario Hydro CE 25-E4, 700 University Ave. Toronto Ont. MSG 1X6, 1987).Google Scholar
3. Microwave Processing of Materials, edited by Sutton, W.H., Brooks, M.H. and Chafinsky, I. (Mater. Res. Soc. Proc. 124, Pittsburgh, PA 1988).Google Scholar
4. Alloum, A.B., Labiad, B. and Villemin, D., J. Chem. Soc. Comm. 386 (1989).Google Scholar
5. Gutierez, E., Loupy, A., Bram, G. and Ruiz-Hitzky, A., Tetrahedron Letters 30(8), 945–8 (1989).Google Scholar
6. Proc. ist Australian Symp. on Microwave Power Applications. (University Press of Wollongong Australia, 1989).Google Scholar
7. Microwave Energy Applications for Industrial Mineral Products (Atomic Energy of Canada Ltd., Chalk River Nuclear Laboratories, Chalk River, Ontario KOJ 1J0 1989).Google Scholar
8. Apté, P.S., Microwave Heating for Ceramic Joining and Multicavity System for Sintering Advanced Shapes, (Ontario Ministry of Energy, 56 Wellesley St. W. Toronto Ont. M7A 2B7, 1988).Google Scholar
9. Li, J., Preconditioning of Powders for Microwave Processing (Ontario Ministry of Energy, see 8 above, 1989).Google Scholar
10. Voss, W.A.G., Electroheat Educ. Newsletter 12, (BNCE/UIE London August 1989).Google Scholar
11. Metaxas, A.C.. J. Microwave Power 24(4), 247–9 (1989).Google Scholar
12. Ashby, M.F.. Phil. Trans. R. Soc. Lond. A. 322, 393–407 (1987).Google Scholar
13. Petrov, E.I.. Electrochemistry in Industrial Processing and Biology k, 46–49 (1977). [UDC 622:778-868. 8:622.344.6].Google Scholar
14. Fisher, S., Department of Electrical Engineering, University of Alberta, 1989 (unpublished).Google Scholar
15. Ulaby, F.J., Bengal, J., East, J., Dobson, M.C., Garvin, J. and Evans, D., Microwave Dielectric Spectrum of Rocks (University of Michigan Ann Arbor MI 48109-2122, 1988).Google Scholar
16. Hutcheon, R.M., M.S. de Jong, Adams, F.F., Hunt, L., Iglesias, F., Wood, G.W. and Parkinson, G., Electromagnetic Energy Reviews 2(4), 46–51 (1989).Google Scholar
17. Couderc, D., Giroux, M. and Bosisio, R.G., J. Microwave Power 8(1), 69–82 (1973).Google Scholar
18. Huang, H.F., J. Microwave Power 11(4), 305–313 (1976).Google Scholar
19. Huang, H.F., J. Microwave Power 4(4), 228–293 (1969).Google Scholar