Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T20:33:16.420Z Has data issue: false hasContentIssue false

Modeling of Channel Formation in Organic Field Effect Transistors

Published online by Cambridge University Press:  15 March 2011

T. Li
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota Minneapolis, MN 55455, USA
P. P. Ruden
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota Minneapolis, MN 55455, USA
I. H. Campbell
Affiliation:
Los Alamos National Laboratory Los Alamos, NM 87545, USA
D. L. Smith
Affiliation:
Los Alamos National Laboratory Los Alamos, NM 87545, USA
Get access

Abstract

We report results of two-dimensional electrostatic modeling for (top-contact) organic field effect transistors, focusing on the formation of the conductive channel. The effect on channel formation of the choice of the source and drain contact metal is investigated. High work function metal (e.g., gold) source and drain contacts produce a conducting p-type region near these contacts. In contrast, low work function metal source and drain contacts (e.g., magnesium) lead to depleted regions. In the center of the device, between the source and drain contacts, the channel carrier density at a fixed gate bias is determined by the work function of the gate contact material, and is essentially independent of the metal used to form the source and drain contacts. The dependence of the transistor threshold voltage on the gate contact metal work function and the device implications of the spatial variation of the induced charge density are discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable