Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T15:31:48.858Z Has data issue: false hasContentIssue false

Modeling of Deformation in Nanocrystalline Copper Using An Atomistic-Based Continuum Approach

Published online by Cambridge University Press:  01 February 2011

D. H. Warner
Affiliation:
Department of Mechanical Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218, USA.
F. Sansoz
Affiliation:
Department of Mechanical Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218, USA.
J. F. Molinari
Affiliation:
Department of Mechanical Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218, USA.
Get access

Abstract

The deformation of copper with grain size less than 10 nm is investigated using a 2D continuum model incorporating atomistically-based constitutive relations. The local constitutive response of a series of symmetric and asymmetric tilt grain boundaries is obtained using an atomistic quasicontinuum method under tension and shear. The atomistic results show that it is possible to associate a constant maximum stress with each deformation mechanism triggered in the GB vicinity, i.e. GB sliding and decohesion, atom shuffling and partial dislocation emission. The GB strength is always found weaker in shear than in tension. This information is incorporated into a continuum polycrystalline model tested under compression. This model provides useful insights, in the absence of intragranular plasticity, into the onset of macroscopic quasi-plasticity, which results from GB sliding and collective grain rotation mechanisms.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable