Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T01:06:41.328Z Has data issue: false hasContentIssue false

Modification on Hydrophilic property for Harsh Environment

Published online by Cambridge University Press:  01 February 2011

Hsin-Chang Tsai
Affiliation:
darwin.tsai@delta.com.tw, Delta Electronics Inc., MEMS Research Center, 252, Shang Ying Road, ,, Kuei San, Taoyuan Hsien, 333, Taiwan, +886-3-3591968 ext 2095, +886-33591991
Yu-Ru Chang
Affiliation:
yuru.chang@delta.com.tw, Delta Electronics Inc., MEMS Research Center, Taiwan
Tai-Kang Shing
Affiliation:
tk.shing@delta.com.tw, Delta Electronics Inc., MEMS Research Center, Taiwan
Get access

Abstract

In this research, a 1∼2 um NiCo film coated by electroplating technique as protection film in high temperature environment was studied. The improvements of hydrophilic property and high temperature stability by coating NiCo film upon pure Cu plate have been characterized through experiments. In thermal stability characterization, the specimens were put into a temperature-controlled oven and applied a thermal load at 100°C, 200°C and 300°C for annealing. After thermal annealing, the hydrophilic property was characterized to confirm that NiCo film was stable in high temperature environment. The hydrophilic property was represented by the contact angle between the DI water and the surface of NiCo film. The outgasing effect of contaminated polymer was also study. The electroplated NiCo film has advantages of good hydrophilic property, high temperature stability and easy fabrication. Therefore, the NiCo film could help the development of thermal related products.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable