Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T03:02:05.719Z Has data issue: false hasContentIssue false

Molecular Self-Assembly of Fe3O4/Polyimide Nanocomposite Films (I)

Published online by Cambridge University Press:  10 February 2011

Yanjing Liu
Affiliation:
Fiber & Electro-Optics Research Center, Bradley Department of Electrical Engineering Virginia Polytechnic, Institute and State University, Blacksburg, VA 24061–0356, roclaus@vt.edu
Anbo Wang
Affiliation:
Fiber & Electro-Optics Research Center, Bradley Department of Electrical Engineering Virginia Polytechnic, Institute and State University, Blacksburg, VA 24061–0356, roclaus@vt.edu
Richard O. Claus
Affiliation:
Fiber & Electro-Optics Research Center, Bradley Department of Electrical Engineering Virginia Polytechnic, Institute and State University, Blacksburg, VA 24061–0356, roclaus@vt.edu
Eric Jiang
Affiliation:
Bio-Rad, Digilab Division, 237 Putnam Avenue, Cambridge, MA 02139
Get access

Abstract

Layer-by-layer molecular self-assembly of nanosized magnetite (Fe3O4) particles and polyimide precursor molecules into multilayer ultrathin films has been accomplished on single crystal silicon and quartz substrates. This process involves the alternate dipping of a substrate into an aqueous solution of cationic polymer which coats on nanoscale Fe3O4 particles as a stabilizer followed by dipping into an aqueous solution of anionie polyimide precursor (polyamic acid salt, PAATEA). The growth process and the structure have been characterized using UV-vis spectroscopy, FT-IR, and scanning electron microscopy. The results demonstrate that well-ordered uniform monolayer and multilayer magnetic films have been formed on silicon and silica surfaces.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable