Hostname: page-component-7b7567c8c-tnzcf Total loading time: 0 Render date: 2026-11-13T10:10:06.950Z Has data issue: false hasContentIssue false
  • English
  • Français

Morphology of Lignin-Polyurethane Blends

Published online by Cambridge University Press:  21 February 2011

D. FeldMan and
N. A. Lacasse
D. FeldMan
Affiliation:
Centre for Building Studies, Concordia University, 1455 de Maisonneuve West, Montreal H3G 1M8 Canada.
N. A. Lacasse
Affiliation:
Centre for Building Studies, Concordia University, 1455 de Maisonneuve West, Montreal H3G 1M8 Canada.
Get access

Abstract

The morphology of blended polyurethane (PU) sealants was studied by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The PU was modifided by mechanical mixing with various amounts of Lignin (L) to achieve a homogeneous blend. Specimens were subjected to control (C), accelerated weathering (AW), and natural weathering (NW) conditions. Results obtained from SEM analysis reveal an even distribution of L particles in the PU matrix. Furthermore, the SEM photomicrographs clearly emphasize the differing morphologies of the constituent phases. They also depict the differences in surface texture between control and aged specimens. The DSC analysis shows that the two phases are immiscible which is in agreement with observations by microscopy.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 154: Symposium K – Electronic Packaging Materials Science IV , 1989, 265
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Blaga, A., Feldman, D., J. Appl. Polym. Sci., 28, 1033 (1983).Google Scholar
2. Feldman, D., Polym. Eng. and Sci., 21 (1), 53–56 (1981).Google Scholar
3. Shaw, M.T. in Polymer Blends and Mixtures, edited by Walsh, D.J., Higgins, J., Maconnackie, A., (Martinus Nijhoff Publ. Dordrecht), 1985, pp. 37–56.Google Scholar
4. Billmeyer, F.W. Jr., Textbook of Polymer Science, 2nd ed. (Wiley Interscience, New York, 1973), pp. 202–203.Google Scholar
5. Collins, E.A., Bares, J., Billmeyer, F.W. Jr., Exeriments in Polymer Science (Wiley Interscience, New York, 1973), pp. 2022–03.Google Scholar
6. Olabisci, O., Robeson, L.M., Shaw, M.T., Polymer-Polymer Miscibility, (Academic Press, New York, 1979).Google Scholar
7. Feldman, D., Lacasse, M., Manley, R. St. J., J. Appl. Polym. Sci. 35, 247 (1988).Google Scholar
8. Sellinek, H.H.G., Degradation & Stabilization of Polymers, Vol.1, (Elsevier Science Publishers, New York, N.Y., 1983).Google Scholar
9. Ramby, B., and Rabek, J.F., Photo degradation, Photo-Oxidation and Photostabilization of Polymers, (John Wiley & Sons, N.Y., N.Y., 1975).Google Scholar
10. Schollenburger, C.S., Stewart, F.D., Advances in Urethane Science & Technology, Vol. II (Technomic Publishing, Westport, Conn. 1973), pp. 11.Google Scholar
11. Shalaby, S.W. and Bair, H.E., in Thermal Characterization of Polymeric Materials, edited by Turi, E. (Academic Press, N.Y., 1981) pp. 406–408.Google Scholar
12. Hesketh, T.R., Bogart, J.W.L. van, Cooper, S.L., Polym. Eng. Sci., 20, 190 (1980).Google Scholar