Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T15:30:27.610Z Has data issue: false hasContentIssue false

Morphology-controlled Growth of Manganese Oxide Electrodes

Published online by Cambridge University Press:  07 July 2011

Banafsheh Babakhani
Affiliation:
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta, Canada T6G 2V4
Douglas G. Ivey
Affiliation:
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta, Canada T6G 2V4
Get access

Abstract

Manganese oxide electrodes are synthesized by anodic deposition on Au coated Si substrates from acetate-containing aqueous solutions. By changing the deposition parameters including deposition current density, electrolyte composition, pH and temperature, a series of nanocrystalline manganese oxide electrodes with various morphologies (non–uniform continuous coatings, rod–like structures, aggregated rods and thin sheets) is obtained. Detailed microstructural characterization of as-deposited electrodes is conducted using scanning electron microscopy (SEM).

Electrochemical analysis using cyclic voltammetry showed that manganese oxide electrodes with rod–like and thin sheet morphology exhibit enhanced electrochemical performance by improving manganese oxide utilization. The highest specific capacitance (~230 F g−1) and capacitance retention rates (~88%) are obtained for manganese oxide thin sheets after 250 cycles in 0.5M Na2SO4 at 20 mV s−1.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable