Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-14T23:59:49.083Z Has data issue: false hasContentIssue false
  • English
  • Français

Multi-Phasic Ceramic Composites made by Sol-Gel Technique

Published online by Cambridge University Press:  15 February 2011

Rustum Roy,
S. Komarneni and
D.M. Roy
Rustum Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
S. Komarneni
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
D.M. Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

Instead of aiming to prepare homogeneous gels and xerogels, this paper reports on work done to prepare deliberately diphasic materials. This has been achieved by three different paths: (1) mixing 2 sols; (2) mixing 1 sol with 1 solution; and (3) post formation diffusion of either one or two solutions.

By the last named process we have made SiO2, mullite and alumina based composites, with silver halides, BaSO4, CdS, etc., as the dispersed phase. The crystal size can be confined to the initial pores by rapid diffusion giving rise to extremely fine second phases in the submicron range. Subsequent reduction of appropriate metallic salts can be used to give finely dispersed metals (e.g. Cu, Ni) in essentially any xerogel matrix. The open porosity makes these metal atoms very accessible.

By the first two processes we have made both single phase and di-phasic gels of the same composition (prototype: mullite) and shown that though they cannot be distinguished by XRD, SEM, and TEM, by DTA and thermal processing, they are radically different. Such di-phasic gels store more metastable energy than any other solids.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 32: Symposium B – Better Ceramics Through Chemistry I , 1984, 347
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Roy, R. and Osborn, E.F.. The System Al2O3-SiO2-H2O, Am. Min. 39, 853 (1954).Google Scholar
2. DeVries, R.C., Roy, R. and Osborn, E.F.. Trans. Brit. Ceram. Soc. 53, 525 (1954).Google Scholar
3. Roy, D.M. and Roy, R.. Am. Mineral. 40, 147 (1955).Google Scholar
4. Roy, R.. Aids in Hydrothermal Experimentation: Methods of Making Mixtures for Both Dry and ‘Wet’ Experimentation, J. Am. Cer. Soc. 39, 145 (1956).CrossRefGoogle Scholar
5. Mumpton, F.A. and Roy, R.. Geochim. et Cosmochim Acta 21, 217 (1961).Google Scholar
6. Roy, R.. Gel Route to Homogeneous Glass Preparation, J. Am. Cer. Soc. 52, 344 (1969).CrossRefGoogle Scholar
7. McBride, J.P.. Preparation of UO2 Microspheres by Sol-Gel Techniques, ORNL-3874 (1966).Google Scholar
8. Thomas, I.M.. Metal-Organic-Derived (MOD) Glass Compositions. Preparation, Properties and Some Applications, Materials Research Society Abstracts, p. 370, Annual Meeting, Boston, MA (1982).Google Scholar
9. Leitheiser, M.A. and Sowman, H.G.. Non-Fused Alumina Oxide-Based Abrasive Mineral, United States Patent 4, 314, 827 (1982).Google Scholar
10. Roy, R.A. and Roy, R.. New Metal-Ceramic Hybrid Xerogels, p. 377, Abstracts, Materials Research Society Annual Meeting, Boston, MA (1982).Google Scholar
11. Hoffman, David, Komarneni, S. and Roy, R.. Preparation of a Di-phasic Photosensitive Xerogel, J. Mat. Sci. Letters (in press).Google Scholar
12. Hoffman, D.W., Roy, R. and Komarneni, S.. Di-phasic Ceramic Composites Via a Sol-gel Method, Materials Letters (in press).Google Scholar
13. Yoldas, B.E., J. Mat. Sci. 14, 1843 (1979).CrossRefGoogle Scholar
14. Roy, R.A. and Roy, R.. Diphasic Xerogels: I. Ceramic-Metal Composites, Mat. Res. Bull. 19, 169 (1984).Google Scholar