Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T17:28:25.670Z Has data issue: false hasContentIssue false

Nanodiamonds Particles as Additives in Lubricants

Published online by Cambridge University Press:  31 January 2011

Ivanov G. Michail
Affiliation:
mig@mail.ustu.ru, Ural State Technical University, Yekaterinburg, Russian Federation
Pavlyshko V. S
Affiliation:
mig1@mail.ustu.ru, Institute of Engineering, Yekaterinburg, Russian Federation
D. M. Ivanov
Affiliation:
newtec@chel.surnet.ru, SKN, Chelyabinsk, Russian Federation
Igor Petrov
Affiliation:
mig3@mail.ustu.ru, Ural State Technical University, Yekaterinburg, Russian Federation
Gary McGuire
Affiliation:
gmcguire@itc-inc.org, ITC, Raleigh, United States
Olga Shenderova
Affiliation:
oshenderova@itc-inc.org, ITC, Raleigh, United States
Get access

Abstract

In the current work we report results of tribological testing of stable colloidal dispersions of detonation nanodiamond (DND) and polytetrafluoroethylene (PTFE) in mineral oil based greases as well as in polyalphaolefin (PAO) oil. Testing has been performed on these formula-tions using ring-on-ring, shaft/bushing and four ball test techniques. The test results demon-strated significant improvements for tribological characteristics (friction coefficient, extreme pressure failure load anddiameter of wear spot) for certain formulations. A strong synergistic effect when using a combination of DND/PTFE additives was observed by a sharp decrease of friction coefficient. It was also demonstrated that using DND with smaller aggregate size (10nm versus 150nm) resulted in better lubricating performance of PAO-based composition.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable