Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T04:09:51.964Z Has data issue: false hasContentIssue false

Nanoindention studies of DC sputtered Cu and Cu/Cr thin films

Published online by Cambridge University Press:  21 March 2011

G. Wei
Affiliation:
Department of Metallurgical and Materials Engineering and Center for Materials for InformationTechnology, The University of Alabama, Tuscaloosa, AL 35487-0209, U.S.A.
J. Du
Affiliation:
Department of Metallurgical and Materials Engineering and Center for Materials for InformationTechnology, The University of Alabama, Tuscaloosa, AL 35487-0209, U.S.A.
A. Rar
Affiliation:
Department of Metallurgical and Materials Engineering and Center for Materials for InformationTechnology, The University of Alabama, Tuscaloosa, AL 35487-0209, U.S.A.
J. A. Barnard
Affiliation:
Department of Metallurgical and Materials Engineering and Center for Materials for InformationTechnology, The University of Alabama, Tuscaloosa, AL 35487-0209, U.S.A.
Get access

Abstract

The nanoindentation behavior of DC magnetron sputtered 10 nm Cu and 10 nm Cu/2 nm Cr thin films deposited on Si (100) has been studied using a Hysitron nanomechanical system. X- ray diffraction and X-ray reflectivity were used to measure the film structure and film thickness, respectively. The grain size and orientation of Cu and Cu/Cr thin films were measured by TEM. Atomic force microscopy (AFM) was used to evaluate the surface morphology and roughness. At the same load, the nanoindentaion displacement of Cu/Cr is smaller than that for Cu, i.e., the 2nm thick Cr underlayer enhances the hardness of Cu. X-ray, TEM, and AFM results show that the grain size of Cu/Cr (< 15 nm) is actually larger than Cu (∼ 3 nm) indicating that the inverse Hall-Petch relationship may be operative.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable