Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T11:59:52.949Z Has data issue: false hasContentIssue false

Nanomechanical Response of Materials and Thin Film Systems: Finite Element Simulation

Published online by Cambridge University Press:  21 February 2011

S.A. Syed Asif
Affiliation:
Department of Materials, University of Oxford, OX1 3PH, UK
B. Derby
Affiliation:
Department of Materials, University of Oxford, OX1 3PH, UK
S.G. Roberts
Affiliation:
Department of Materials, University of Oxford, OX1 3PH, UK
Get access

Abstract

Finite element simulation of the nanoindentation process has been carried out to investigate the nanomechanical response of materials and thin film systems. The influence of the geometry of the indenter, friction between the indenter and the surface, and pre-stress in the film, on the nanomechanical response have all been investigated. The effect of pile-up on the contact area calculation and the problems which occur with the commonly used methods in calculating the contact area have been studied. Results shows considerable error in calculating the contact area which depends on the indentation conditions used for the simulation. Simulation results suggest, that the influence of residual stress on hardness response is material sensitive.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable