Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T13:15:04.955Z Has data issue: false hasContentIssue false

Nanoscale Etching of Metallic Perovskites Using STM

Published online by Cambridge University Press:  17 March 2011

Ø. Dahl
Affiliation:
Department of Electronics and Telecommunication, Norwegian University of Science and Technology, N-7491 Trondheim, Norway
S. Hallsteinsen
Affiliation:
Department of Physics, Norwegian University of Science and Technology, N-7491 Trondheim, Norway
J. K. Grepstad
Affiliation:
Department of Electronics and Telecommunication, Norwegian University of Science and Technology, N-7491 Trondheim, Norway
A. Borg
Affiliation:
Department of Physics, Norwegian University of Science and Technology, N-7491 Trondheim, Norway
T. Tybell
Affiliation:
Department of Electronics and Telecommunication, Norwegian University of Science and Technology, N-7491 Trondheim, Norway
Get access

Abstract

In the present work we use a scanning tunneling microscope to modify the surface structure of epitaxial SrRuO3 thin films. Point and line etching experiments were carried out in ultra-highvacuum, using tungsten tips. The point etchings showed that pulses fired at small (< 4.5V) bias voltages did not bring about any physical modifications of the film surface, while voltages in excess of4.5 V led to etched holes accompanied by mounds. Moreover, well-defined line etching was achieved with atypical depth of approximately two unit cells and linewidths as small as 5 nm. The experiments demonstrate that a scanning tunneling microscope can be used for nanometer-scale patterning of SrRuO3 thin film surfaces.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable