Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-12T13:11:31.114Z Has data issue: false hasContentIssue false
  • English
  • Français

New Rapid Setting Alkali Activated Cement Compositions

Published online by Cambridge University Press:  21 February 2011

D. M. Roy,
M. R. Silsbee and
D. Wolfe-Confer
D. M. Roy
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
M. R. Silsbee
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
D. Wolfe-Confer
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
Get access

Abstract

The advantage of utilizing blended cements for many applications has been well documented. However, the use of these materials has been limited by the longer setting times associated with the use of these materials. This report discusses the development of formulations employing alkali activation to shorten the setting times. The results of characterization of these materials using calorimetry, microscopic, x-ray diffraction, and mechanical property techniques are discussed.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 179: Symposium Y – Specialty Cements with Advanced Properties , 1989, 203
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Roy, D. M., “New Strong Cement Materials: Chemically Bonded Ceramics,” Science, 235, 651–658 (1987).Google Scholar
2. Roy, D. M., ed., “The Status of Cement and Concrete R and D in the U.S.” (Report NMAB-361), National Materials Advisory Board, National Research Council, Washington, D.C. (1980).Google Scholar
3. Talling, B., “Effect of Curing Conditions on Alkali-Activated Slags,” in Fly Ash, Silica Fume, Slag, and Natural Pozzlons in Concrete,” Vol. 2, Proceedings Third International Conference, Trondheim, Norway, ACI SP-1 14, 1485–1500 (1989).Google Scholar
4. Forss, B., “Experiences From the Use of F-Cement–A Binder Based on Alkali-Activated Blastfumace Slag,” in Alkalis in Concrete, 101–104, Copenhagen, Denmark (1983).Google Scholar
5. Wu, Xuequan, Jiang, Weimin, and Roy, D. M., “Early Activation and Properties of Slag Cement,” Cem. Concr. Res., 20, 961–74 (1990).Google Scholar
6. Majumdar, A. J., Edmonds, R. N., and Singh, B., “Hydration of Secar 71 Aluminous Cement in Presence of Granulated Blast Furnace Slag,” Cem. Conc. Res., 20(1), 7–14 (1990).Google Scholar
7. Roy, D. M., “Hydration and Chloride Diffusion of Slag-Cement Pastes and Mortars,” Vol. 2, Proceedings Third International Conference, Trondheim, Norway ACI SP-114, 1265–1282 (1989).Google Scholar
8. Davidovits, J., “Ancient and Modem Concretes: What Is The Real Difference?” Con. Int., 23–35 (1987).Google Scholar
9. Heitsmann, R. F., Fitzgerald, M., and Sawyer, J. L., U.S. Patent No. 4,642,137, February 10, 1987.Google Scholar
10. Silsbee, M., Malek, R. I. A., and Roy, D. M., in Vol.4of the Proceedings of the 8th International Conference on The Chemistry of Cement, Financiadora de Estudos e Projectos, Rio de Janeiro, pp. 263–269, September (1986).Google Scholar
11. Kaushal, S., Roy, D. M., and Licastro, P. H., “Heat of Hydration and Characterization of Reaction Products of Adiabatically Cured Fly Ash and Slag Mixtures,” in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal II, Mat. Res. Soc. Symp. Proc., 65,Eds. Hemmings, R. T., Berry, E. E., Berry, G. J., and Glasser, F. P. (Materials Research Society, Pittsburgh, 1989), pp. 87–97.Google Scholar