Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T20:48:20.294Z Has data issue: false hasContentIssue false

Non-Stick and Scratch Resistant Sol-Gel Coating for Aluminum

Published online by Cambridge University Press:  15 February 2011

Linda Y.L. Wu
Affiliation:
Surface Technology Group, Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, Singapore 638075
Sandor Nemeth
Affiliation:
Surface Technology Group, Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, Singapore 638075
Get access

Abstract

PTFE-based coatings have been widely used, for example, on aluminum molds for molding of polyolefin packaging materials for its non-stick property. However, these coatings do not meet the users' scratch resistance and durability requirements. This paper describes a preliminary study on the synthesis and characterization of a PTFE/sol-gel composite coating material which combines the required non-stick and low friction properties of PTFE filler with the high scratch resistance and durability of a silica-based sol-gel matrix. The non-stick and low friction properties were achieved by using both the PTFE filler and the lubricious compound resulting from the reaction of a solvent with siloxane. The high scratch resistance was attributed to the enhanced adhesion to the electro-chemically pre-treated surface and the optimized silica and alumina filler contents in the sol-gel material. FE-SEM/EDX, FTIR, contact angle goniometry, scratch testing and a pin-on-disc tribometry were used to evaluate the coating properties.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable