Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T12:19:16.775Z Has data issue: false hasContentIssue false

A novel 3C-SiC on Si power Schottky diode design and modelling

Published online by Cambridge University Press:  10 June 2014

Fan Li
Affiliation:
School of Engineering, University of Warwick, Library Road, Coventry, CV4 7AL, UK.
Yogesh K. Sharma
Affiliation:
School of Engineering, University of Warwick, Library Road, Coventry, CV4 7AL, UK.
Craig A. Fisher
Affiliation:
School of Engineering, University of Warwick, Library Road, Coventry, CV4 7AL, UK.
Michael R. Jennings
Affiliation:
School of Engineering, University of Warwick, Library Road, Coventry, CV4 7AL, UK.
Philip A. Mawby
Affiliation:
School of Engineering, University of Warwick, Library Road, Coventry, CV4 7AL, UK.
Get access

Abstract

Although 3C-SiC has a narrower bandgap than 4H-SiC, it is the only SiC polytype that can be grown directly over large area silicon substrates. It has the potential to provide a more economical choice than 4H-SiC for intermediate power devices, such as inverters for electric vehicles. To fabricate a vertical device on 3C-SiC, the Si substrate is usually removed either by etching or polishing. Neither of these processes is economical nor efficient. In this paper we propose a lateral Schottky diode design for 3C-SiC on Si structure. 2D finite element simulations using ATLAS showed that a breakdown voltage beyond 1200 V can be achieved with a 4 μm thick epilayer. Physical models used for 3C-SiC/Si power devices simulations are introduced. Advantages of lateral 3C-SiC/Si diodes over free standing 3C-SiC are also discussed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable