Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T17:36:17.902Z Has data issue: false hasContentIssue false

A Novel Bonding Technique Using Metal-Induced Crystallization of Amorphous Silicon

Published online by Cambridge University Press:  01 February 2011

Markus D. Ong
Affiliation:
ong15@stanford.edu, Stanford University, Materials Science and Engineering, 1033 Crestview Dr Apt 216, Mountain View, CA, 94040, United States
Reinhold H. Dauskardt
Affiliation:
dauskardt@stanford.edu, Stanford University, Materials Science and Engineering, 416 Escondido Mall, Stanford, CA, 94305, United States
Get access

Abstract

This study investigates the used of aluminum-induced crystallization of amorphous silicon is a potential bonding mechanism for a sandwich stack of films between two silicon substrates. Similar procedures using copper diffusion bonds have been in use, but these require temperatures as high as 400°C. Using the crystallization of amorphous silicon as the bonding mechanism has allowed the bonding temperature to be lowered by more than 100 K. Fracture experiments for a low-k material were conducted, and the results using amorphous silicon bonding was compared to epoxy bonding control experiments. Essentially identical results were obtained for the two bonding mechanisms. Low-temperature bonding techniques are of great interest to future progress in the microelectronics industry, and these results are promising advances.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable