Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T16:28:46.729Z Has data issue: false hasContentIssue false

A Novel Low Temperature Self-Aligned Ti Silicide Technology for Sub-0.18 μm CMOS Devices

Published online by Cambridge University Press:  10 February 2011

L. P. Ren
Affiliation:
Department of Electrical Engineering, University of California at Los Angeles, Los Angeles, CA90095-1594, ren@ee.ucla.edu
P. Liu
Affiliation:
Department of Electrical Engineering, University of California at Los Angeles, Los Angeles, CA90095-1594, ren@ee.ucla.edu
G. Z. Pan
Affiliation:
Department of Electrical Engineering, University of California at Los Angeles, Los Angeles, CA90095-1594, ren@ee.ucla.edu
Jason C. S. Woo
Affiliation:
Department of Electrical Engineering, University of California at Los Angeles, Los Angeles, CA90095-1594, ren@ee.ucla.edu
Get access

Abstract

A novel low temperature self-aligned Ti silicidation with Ge+ pre-amorphization implant (PAI) is presented. Compared to conventional high temperature PAI silicidation, the advantages of Ti salicidation at temperatures below the recrystallization of a pre-amorphized layer are: (1) C49 TiSi2 silicide formation occurs only in the pre-amorphized layer so that the silicide depth can be well controlled, forming a very sharp interface between the silicide and the Si substrate; (2) Ti just reacts with the amorphous layer, avoiding the so-called bridging issue in which the silicide grows laterally over the isolation or spacer; (3) the effects of metal thickness and substrate doping on silicide formation are suppressed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable