Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T02:57:43.051Z Has data issue: false hasContentIssue false

Nuclear Magnetic Resonance Studies of Granular Flows – Current Status

Published online by Cambridge University Press:  01 February 2011

Stephen A. Altobelli
Affiliation:
New Mexico Resonance, Albuquerque, NM 87108, U.S.A.
Arvind Caprihan
Affiliation:
New Mexico Resonance, Albuquerque, NM 87108, U.S.A.
Eiichi Fukushima
Affiliation:
New Mexico Resonance, Albuquerque, NM 87108, U.S.A.
Joseph D. Seymour
Affiliation:
New Mexico Resonance, Albuquerque, NM 87108, U.S.A.
Get access

Abstract

Nuclear magnetic resonance (NMR) is a non-intrusive method that can characterize not only the particulate density but also velocity and velocity fluctuation parameters. A survey of all the known NMR measurements of granular flow will be followed by a brief description of NMR as it applies to granular flow. Two new experiments, both involving flows in partially filled rotating horizontal cylinders, will be described. First, the effect of a stationary blade to suppress the azimuthal velocity of particles being brought up and deposited into the flowing layer on flow-velocity profiles will be studied. Suppressing the azimuthal velocity reduces the deviation of the velocity profile from a quadratic dependence on the height above the rigid layer. Second, a new NMR scheme will be presented that yields spatial distributions of collisional correlation times for macroscopic particles undergoing granular flow. It is based on Pulsed-Gradient Spin-Echo strategy that is commonly used to measure molecular diffusion in liquids. The scheme will be demonstrated with an example from shear flow in a partially-filled horizontal cylinder. Spatially resolved collisional correlation times and velocity fluctuation intensities are derived from the measurements and have values of ∼1 ms and ∼10-3 m2/s2 respectively, at the center of the free surface for 2 mm particles in a 70 mm diameter cylinder rotating at 2.36 rad/s.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable