Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T10:54:31.796Z Has data issue: false hasContentIssue false

Numerical Modeling of Electrothermal Effects in Silicon Nanowires

Published online by Cambridge University Press:  01 February 2011

Cicek Boztug
Affiliation:
cicek@engr.uconn.edu, University of Connecticut, Electrical Engineering, Jewett 110, Storrs, CT, 06269, United States, 8605486945
Gokhan Bakan
Affiliation:
gokhan.bakan@uconn.edu, University of Connecticut, Department of Electrical and Computer Engineering, Storrs, CT, 06269, United States
Mustafa Akbulut
Affiliation:
mustafa@engr.uconn.edu, University of Connecticut, Department of Electrical and Computer Engineering, Storrs, CT, 06269, United States
Ali Gokirmak
Affiliation:
gokirmak@engr.uconn.edu, University of Connecticut, Department of Electrical and Computer Engineering, Storrs, CT, 06269, United States
Helena Silva
Affiliation:
silva@engr.uconn.edu, University of Connecticut, Department of Electrical and Computer Engineering, Storrs, CT, 06269, United States
Get access

Abstract

Asymmetric melting was observed in electrically pulsed n-type (phosphorus) nanocrystalline silicon (nc-Si) wires fabricated lithographically. Scanning electron microscope (SEM) images taken from the pulsed wires showed that melting initiates from the ground terminal end of the wires instead of the center as initially expected. Asymmetry in the temperature profile is caused by heat exchanged between charge carriers and phonons when an electrical current is passed along a temperature gradient. This effect is known as Thomson effect, a thermoelectric heat transfer mechanism. One dimensional (1D) time dependent heat diffusion equation including Thomson heat term was solved to model the temperature profile on our structures. The modeling results show that Thomson effect introduces significant shifts in the temperature distribution. The effect of Thomson heat is modeled for various electrical pulse conditions and wires dimensions. Our results indicate that Thomson effect is significant in small scale electronic devices operating under high current densities.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable