Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T16:14:48.705Z Has data issue: false hasContentIssue false

On The Mechanics of Indentation Induced Lateral Cracking

Published online by Cambridge University Press:  01 February 2011

Xi Chen*
Affiliation:
Department of Civil Engineering and Engineering Mechanics, Columbia University New York, NY 10027
Get access

Abstract

The mechanics governing the lateral cracks that form when a hard object plastically penetrates a ceramic is presented. The roles of indentation load, penetration depth and work of indentation are all highlighted, as are the influences of the mechanical properties of the substrate. The three dimensional axisymmetric problem for an annular crack driven by a rigid spherical or conical indenter pushed into a semi-infinite half-space of elastic-perfectly plastic material is solved using numerical methods. The region of highest tensile stress is identified corresponding to the location where a crack is most likely to nucleate. This location coincides with the depth below the surface where the crack will expand parallel to the surface under mode I conditions. The solutions have been validated by comparison with measurements of the cracks that form upon Vickers indentation. The basic formula for the crack radius has been used to predict trends in cracking upon static penetration.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable