Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T21:40:11.099Z Has data issue: false hasContentIssue false

Ontario Hydro's R&D on Sorbent Injection Waste Part II. Handling and Disposal

Published online by Cambridge University Press:  21 February 2011

Arnold Golomb
Affiliation:
Ontario Hydro Research Division, 800 Kipling Avenue, Toronto, Ontario, Canada, M8Z 5S4
Babu R. Nott
Affiliation:
Ontario Hydro Research Division, 800 Kipling Avenue, Toronto, Ontario, Canada, M8Z 5S4
Get access

Summary

Canadian utilities are investigating the use of Furnace Sorbent Injection (FSI) for control of acid gas emissions from thermal generating stations. Typically, limestone or slaked lime is injected into the furnace [1,2] and is calcined to calcium oxide (CaO), which reacts with sulphur dioxide (SO2) and oxygen, forming calcium sulphate:

or

The by-product is removed with the fly ash, using back-end particulate control equipment. The resulting solid waste usually contains substantial amounts (e.g., 20 to 40% w/w) of unreacted CaO, which can cause handling and disposal problems because of its vigorous exothermic reaction on contact with water:

The solid waste can set prematurely in the handling equipment. It can also produce a harmful dust and/or yield a highly alkaline leachate that could affect local ground and/or surface water supplies.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable