Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T16:01:07.306Z Has data issue: false hasContentIssue false

Optimisation of Junctions formed by Solid Phase Epitaxial Regrowth for sub-70nm CMOS

Published online by Cambridge University Press:  01 February 2011

Richard Lindsay
Affiliation:
IMEC, Kapeldreef 75, Leuven, B3001 Belgium. Philips Research Leuven, IMEC, Leuven, B3001 Belgium.
Bartlomiej J. Pawlak
Affiliation:
IMEC, Kapeldreef 75, Leuven, B3001 Belgium. Philips Research Leuven, IMEC, Leuven, B3001 Belgium.
Peter Stolk
Affiliation:
IMEC, Kapeldreef 75, Leuven, B3001 Belgium. Philips Research Leuven, IMEC, Leuven, B3001 Belgium.
Karen Maex
Affiliation:
IMEC, Kapeldreef 75, Leuven, B3001 Belgium. Philips Research Leuven, IMEC, Leuven, B3001 Belgium.
Get access

Abstract

For the 70nm CMOS node, it is anticipated that conventional implantation and spike annealing approaches, even with pre-amorphisation and co-implantation, are unlikely to provide pMOS junctions consistent with the ITRS requirements. Here the junction performance is limited by equilibrium solid solubility.

As laser annealing and in-situ doping techniques currently have unsolved integration problems, there is a renewed interest in using solid phase epitaxial regrowth (SPER) to form ultra-shallow metastable junctions. Such junctions have the potential to have an active dopant profile similar to the as-implanted profile. This offers above equilibrium solid solubility and abrupt profiles compatible with 70nm and even 45nm nodes. However there are concerns about residual defects, deactivation, diffusion and uniformity.

In this paper we show how the Ge, F and B implant and SPER anneal can be optimised for abrupt, uniform and highly activated B junctions. There is latitude for higher doses and energies than conventional implants, however results show that this may lead to clustering causing enhanced deactivation and reduced mobility. We give attention to the probing issues involved in characterising partially annealed junctions.

With this approach, p-type junctions having a sheet resistance of 265 ohms/sq and depth of 22nm are realised which are compatible with 70nm and potentially 45nm CMOS nodes.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable