Hostname: page-component-7b7567c8c-tnzcf Total loading time: 0 Render date: 2026-11-15T02:02:56.260Z Has data issue: false hasContentIssue false
  • English
  • Français

Optimization of Alloy-Coating Compositions for Use as Solid Oxide Fuel Cell Interconnects

Published online by Cambridge University Press:  21 February 2012

Jeffrey W. Fergus,
Yu Zhao and
Yingjia Liu
Jeffrey W. Fergus
Affiliation:
Auburn University, Materials Research and Education Center, 275 Wilmore Laboratories, Auburn, AL 36849, U.S.A.
Yu Zhao
Affiliation:
Auburn University, Materials Research and Education Center, 275 Wilmore Laboratories, Auburn, AL 36849, U.S.A.
Yingjia Liu
Affiliation:
Auburn University, Materials Research and Education Center, 275 Wilmore Laboratories, Auburn, AL 36849, U.S.A.
Get access

Abstract

Reduction in the operating temperature of solid oxide fuel cells (SOFCs) allows for the use of ferritic stainless steels as the interconnect material. However, cathode poisoning due to volatilization of chromium from the oxide scale formed on these alloys requires the use of a ceramic coating on the alloy. The reaction layer formed between the coating and the alloy affects the performance of the fuel cell, so the composition and properties of this layer must be considered in selecting the alloy and coating compositions. In this paper, the factors relevant to selection of the alloy/coating materials and the effect of the alloy-coating interaction on these factors are discussed.

Keywords

ceramiccoatingdiffusion

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1384: Symposium B – Advanced Materials for Fuel Cells , 2012, mrsf11-1384-b13-22
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Yang, Z., Int. Mater. Rev. 53, 39 (2008).Google Scholar
2. Fergus, J.W., Mater. Sci. Eng. A 397, 271 (2005).Google Scholar
3. Wu, J. and Liu, X, J. Mater. Sci. Tech. 26, 293 (2010).Google Scholar
4. Quadakkers, W.J., Piron-Abellan, J., Shemet, V. and Singheiser, L., Materials at High Temperatures 20, 115 (2003).Google Scholar
5. Horita, T., Yamaji, K., Yokokawa, H., Toji, A., Uehara, T., Ogasawara, K., Kameda, H., Matsuzaki, Y. and Yamashita, S., Int. J. Hydrogen Energy 33, 6308 (2008).Google Scholar
6. Jablonski, P.D., Cowen, C.J. and Sears, J.S., J. Power Sources 195, 813 (2010).Google Scholar
7. Tu, H. and Stimming, U., J. Power Sources 127, 284 (2004).Google Scholar
8. Fergus, J.W., Int. J. Hydrogen Energy 32, 3664 (2007).Google Scholar
9. Shaigan, N., Qu, W., Ivey, D.G. and Chen, W., J. Power Sources 195 (2010) 1529.Google Scholar
10. Kurokawa, H., Jacobson, C.P., DeJonghe, L.C. and Visco, S.J., Solid State Ionics 178 (2007) 287.Google Scholar
11. Collins, C., Lucas, J., Buchanan, T.L., Kopczyk, M., Kayani, A., Gannon, P.E., Deibert, M.C., Smith, R.J., Choi, D.-S. and Gorokhovsky, V.I., Surf. Coating Tech. 201 (2006) 4467.Google Scholar
12. Yang, Z., Xia, G.-G., Wang, C.-M., Nie, Z., Templeton, J., Stevenson, J.W. and Singh, P., J. Power Sources 183 (2008) 660.Google Scholar
13. Wang, K., Liu, Y. and Fergus, J.W., J. Am. Ceram. Soc. in press, doi:10.1111/j.1551–2916.2011.04749.x Google Scholar
14. Fergus, J.W., Liu, Y. and Zhao, Y., Ceramic Trans. in press.Google Scholar
15. Fergus, J.W., Wang, K. and Liu, Y., “Transition Metal Spinel Oxide Coatings for Reducing Chromium Poisoning in SOFCs,” Electrochem. Trans. 33[40] (2011) 77–84.Google Scholar
16. Stevenson, J.W., Xia, G.G., Choi, J.P., Chou, Y.S, Thomsen, E.C., Yoon, K.J., Scott, R.C., Li, X. and Nie, Z., Proc. 12th Ann. SECA Workshop (DOE, 2011).Google Scholar
17. Fergus, J.W. and Zhao, Y., “Low-Chromium Alloys for Solid Oxide Fuel Cell Interconnects,” Electrochem. Trans. 35[1] (2011) 2447–2453.Google Scholar