Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T23:37:19.621Z Has data issue: false hasContentIssue false

Optimization of RF-Sputtered ITO Films for High NIR Transparency at Low Deposition Temperature

Published online by Cambridge University Press:  01 February 2011

J. Zhou
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401
X. Wu
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401
T.A. Gessert
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401
Y. Yan
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401
G. Teeter
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401
H.R. Moutinho
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401
Get access

Abstract

Sn-doped indium oxide (ITO) films deposited at temperatures <250°C by r.f. magnetron sputtering are investigated for use as transparent back-contact electrodes to CdS/CdTe top cells in two-junction, mechanically stacked tandem-cell designs. Results show that carrier mobility increases with substrate temperature while beneficial changes in carrier activation occurs at a substrate temperature ~230°C. Small additions of oxygen to the sputtering environment are effective at reducing near infrared (NIR) absorption. Control of these deposition parameters has produced ITO films with NIR absorption (860–1300 nm) < 10%, and electrical resistivity of <1x10-3 ohm-cm.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable