Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-19T04:31:39.772Z Has data issue: false hasContentIssue false

Optimized screen-printing and SEM-FIB characterization of YSZ thin films for Solid Oxide Fuel Cells and gas sensors devices

Published online by Cambridge University Press:  15 March 2011

A. Morata
Affiliation:
Electronics Materials and Engineering (EME), Department of Electronics, University of Barcelona, Spain
A. Tarancón
Affiliation:
Electronics Materials and Engineering (EME), Department of Electronics, University of Barcelona, Spain
G. Dezanneau
Affiliation:
Electronics Materials and Engineering (EME), Department of Electronics, University of Barcelona, Spain
F. Peiró
Affiliation:
Electronics Materials and Engineering (EME), Department of Electronics, University of Barcelona, Spain
J. R. Morante
Affiliation:
Electronics Materials and Engineering (EME), Department of Electronics, University of Barcelona, Spain
Get access

Abstract

In the present work, the screen printing technique has been used to deposit thick films of Zr0.84Y016O1.92 (8YSZ). In order to control the final porosity in view of a specific application (SOFCs or gas sensor), an experimental design based on analysis of variances (ANOVA) has been carried out. From this, we were able to determine the influence of several technological parameters on films porosity and grain size. The films obtained have been analysed with both Scanning Electron Microscopy (SEM) and Focused Ion Beam (FIB) combined with SEM. We show that only the combination of experimental design and advanced observation technique such as Focused Ion Beam allowed us to extract significant information for the improvement of the deposition process.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable