Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T05:48:10.121Z Has data issue: false hasContentIssue false

Optofluidic Waveguiding for Biomedical Sensing

Published online by Cambridge University Press:  30 December 2014

Thomas A. Wall
Affiliation:
Brigham Young University, Provo, Utah 84602, U.S.A.
Joshua Parks
Affiliation:
University of California, Santa Cruz, 1156 High St, Santa Cruz, CA 95064, U.S.A.
Kaelyn D. Leake
Affiliation:
University of California, Santa Cruz, 1156 High St, Santa Cruz, CA 95064, U.S.A.
Holger Schmidt
Affiliation:
University of California, Santa Cruz, 1156 High St, Santa Cruz, CA 95064, U.S.A.
Aaron R. Hawkins
Affiliation:
Brigham Young University, Provo, Utah 84602, U.S.A.
Get access

Abstract

We review an optofluidic waveguiding lab-on-a-chip used to sense bioparticles. The sensor uses a liquid filled Anti-Resonant Reflecting Optical Waveguide (ARROW) that is interfaced with standard ridge waveguides. The ridge waveguides are coupled to off-chip lasers and detectors via optical fiber. A perpendicular intersection between the ARROW and a ridge waveguide is especially useful for detecting fluorescently tagged particles. Light coupled into the ridge waveguide can fluorescently excite these particles within a very small volume. Fluorescent signal can then be guided within the ARROW and subsequently off chip to a detector.

We also discuss how such devices are fabricated. Both the ARROW and ridge waveguides are made using alternating thin films of tantalum oxide and silicon dioxide on silicon substrates. These thin films are deposited by either sputtering or plasma enhanced chemical vapor deposition (PECVD). The waveguides are patterned using a combination of standard photolithographic processes, reactive ion etching, and sacrificial etching. Low-loss optical guiding is very dependent on both the waveguide structure and the materials used. The latest processes for maximizing detection sensitivity are reviewed.

We also present results using the optofluidic waveguiding sensor for detecting a variety of different types of particles such as fluorescently labeled nanobeads, viruses, ribosomes, and RNA.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable